AV Signals -The Basics

Title:AV Inputs & Outputs – Understanding the Flow of Signals

Author: Cable Chick

Full Text & Source: http://www.cablechick.com.au/blog/understanding-av-inputs-and-outputs/

The Internet, Online, 04/06/2016

Sample Text:

The Basics

Understanding the flow of signals within your home theatre starts with becoming familiar with the three distinct types of devices that your home entertainment components fall into: Source Devices, Hub Devices & Sink Devices

Source Hub Sink Flow Diagram

Source Hub Sink
EXAMPLES:
Blu-ray Player
Media Centre
CD Stacker
Tape Deck
Games Console
iPod / MP3 Player
Foxtel
Apple TV
EXAMPLES:
Amplifier
AV Receiver
Home Theatre Hub
True Matrix
Splitter
Switch
Signal Converter
EXAMPLES:
Television
Projector
PC Monitor
Speaker

Source Devices are easy to identify as they generally only have AV Outputs – they play your media and send the audio and video signals OUT.

Hub Devices can be trickier, as they accept both Inputs and Outputs – they do all the sorting to organise multiple home theatre components.

Sink Devices are the final destination for your video and/or audio, and have mostly Inputs – they display the video and play the sound that they receive IN.
‘Sink device’ is an industry term, so we tend to say destination device for clarity.

A Typical Home Theatre

Let’s look at a simple home theatre setup that comprises of a couple of Source devices – a Games Console and a Blu-ray Player – along with a Television and a Surround Sound speaker system controlled by an AV Receiver.

In this example, the Console and Blu-ray player are source devices. They have Outputs which are sending HDMI data (audio and video) out. The AV Receiver has Inputs which can accept both of these signals in – you select which one is active with your remote control – which it then sorts and sends on through its Outputs. Because it has both inputs and outputs, it’s what we consider a hub device. Finally, the Television receives video data with its Input, and the Speakers receive decoded analogue audio signals, making them sink or destination devices.

This simplified diagram does not take into consideration the non-audio/video abilities of some components. A games console may have input sockets for controllers or cartridges, but they’re outside of the scope of this guide. We’re just dealing with audio and video (AV).

Keeping your home theatre linear like this can make life easier, but this isn’t always possible when new technologies emerge that aren’t compatible with all of your equipment. Bypassing your AV Receiver is covered in a different blog,

The Rule-Breakers

Home Theatre wiring becomes more complex when source and destination devices have features that contradict their traditional roles. For example:

  • HDMI Audio Return Channel (ARC) – found on modern TVs and Projectors (see next section)
  • SPDIF Audio Outputs – found on many TVs
  • Headphone Jacks – on TVs and Projectors
  • DisplayPort and Thunderbolt Video Daisy-Chaining – on modern Macs and PC Monitors

Features like these can allow some components to work like Hubs under certain circumstances. Let’s look at an example where a TV is being used as a hub device rather than as a destination device.

Television as Home Theatre Hub

Here, we’re using the SPDIF Digital Audio output on the TV to send sound data to a receiver, which decodes it for the speaker system. SPDIF can be either Optical (TOSLINK) or Coaxial (RCA), depending on the make and model of TV. Other devices also have SPDIF support, including games consoles and some projectors.

The main benefit of this method is that everything shown on the TV plays audio through the speaker system, including free-to-air TV if connected. This solution is also good when your AV Receiver isn’t HDMI-ready. One drawback is that you’re mostly limited to 5.1 audio, as SPFID only works with PCM Stereo, Dolby Digital and DTS Surround Sound – it can’t carry lossless surround or 7.1 formats.

TVs and Projectors which have Headphone Jacks or 2-RCA analogue stereo outputs can also be used in the manner shown above, but you can only get regular stereo audio this way. Still, even a cheap pair of powered speakers should sound better than the ones built into your telly!

HDMI Audio Return Channel (ARC)

The HDMI Audio Return Channel feature is an optional ability in HDMI v1.4 (and above) hardware that allows selected inputs to send audio data back from a destination device like a Projector or a Television to a compatible hub device. This effectively makes an HDMI input also an output – but only for audio!

Using HDMI ARC In Your Home Theatre

This example shows free-to-air television stations being received via a rooftop antenna plugged directly into a TV with a built-in digital tuner. In order to get audio back to the AV Receiver to make use of the home theatre speakers, HDMI ARC is leveraged to eliminate an additional audio cable.

You aren’t limited to just TV stations for ARC, either. If the Console and Blu-Ray player above were connected to the TV as well, their audio would also return to the AV Receiver. HDMI ARC can handle Dolby TrueHD and DTS-HD Master Audio up to 7.1 Channels, so it has many advantages.

Not all HDMI sockets have ARC enabled, though! Look on the back of your TV, or in your user manual, to find the HDMI inputs specifically labelled as ARC. Both the TV and AV Receiver (as in the above example) have to support ARC for it to function.

HDMI ARC Socket Identification

Switch / Splitter / Matrix

Switches, Splitters and True Matrixes are all considered hub devices as they accept one or more inputs, sort the signals, and direct them to one or more outputs.

We have a whole blog dedicated to these devices, what they do, and when to use them. We also have animated signal flow diagrams there – check it out!

read full article online……….

 

Advertisements

About Author Annette J Dunlea Irish Writer

Irish Writer Website: http://ajdunlea.webs.com/ Twitter: @adunlea Facebook: https://www.facebook.com/annettejdunleairishauthor
This entry was posted in Blogs And Blogging, Satellite & Digital TV, Technology, Television and tagged , , , , , , , , . Bookmark the permalink.

One Response to AV Signals -The Basics

  1. smilecalm says:

    quite informative
    & useful 🙂

    Like

Comments are closed.